or

use pdftk: http://www.pdflabs.com/tools/pdftk-the-pdf-toolkit/
examples: http://www.accesspdf.com/article.php/20041129175231241

METHOD 3 – CHROOT

This method of installation uses the chroot command to gain access to the broken system’s files. Once the chroot command is issued, the LiveCD treats the broken system’s / as its own. Commands run in a chroot environment will affect the broken systems filesystems and not those of the LiveCD.

1. Boot to the LiveCD Desktop (Ubuntu 9.10 or later). Please note that the Live CD must be the same as the system you are fixing – either 32-bit or 64-bit (if not then the chroot will fail).
2. Open a terminal – Applications, Accessories, Terminal.
3. Determine your normal system partition – (the switch is a lowercase “L”)
sudo fdisk -l
* If you aren’t sure, run
df -Th. Look for the correct disk size and ext3 or ext4 format.
4. Mount your normal system partition:
* Substitute the correct partition: sda1, sdb5, etc.
sudo mount /dev/sdXX /mnt # Example: sudo mount /dev/sda1 /mnt
5. Only if you have a separate boot partition:
* sdYY is the /boot partition designation (for example sdb3)
* sudo mount /dev/sdYY /mnt/boot
6. Mount the critical virtual filesystems:
sudo mount –bind /dev /mnt/dev
sudo mount –bind /dev/pts /mnt/dev/pts
sudo mount –bind /proc /mnt/proc
sudo mount –bind /sys /mnt/sys
7. Chroot into your normal system device:
sudo chroot /mnt
8. If there is no /boot/grub/grub.cfg or it’s not correct, create one using
update-grub
9. Reinstall GRUB 2:
* Substitute the correct device – sda, sdb, etc. Do not specify a partition number.
grub-install /dev/sdX
10. Verify the install (use the correct device, for example sda. Do not specify a partition):
sudo grub-install –recheck /dev/sdX
11. Exit chroot: CTRL-D on keyboard
12. Unmount virtual filesystems:
sudo umount /mnt/dev/pts
sudo umount /mnt/dev
sudo umount /mnt/proc
sudo umount /mnt/sys
* If you mounted a separate /boot partition:
sudo umount /mnt/boot
13. Unmount the LiveCD’s /usr directory:
sudo umount /mnt/usr
14. Unmount last device:
sudo umount /mnt
15. Reboot.
sudo reboot

On Eclipse
Project->Properties
C/C++ Build->Settings
GCC C Linker->Miscellaneous
Linker flags: -lgmp -lgmpxx

for example
byte[] a = “Test”.getBytes();
byte[] b = “Test”.getBytes();

(a == b) –> false
Arrays.equals(a,b) –> true

make -DDISABLE_VULNERABILITIES install clean

Note: portaudit may stop installation because of vulnarabilities of php5 port. In order to solve this problem give following command.
make -DDISABLE_VULNERABILITIES install clean

Install php5 extras

cd /usr/ports/databases/php5-mysql
make install clean

cd /usr/ports/www/php5-session
make install clean

cd /usr/ports/graphics/php5-gd
make install clean

Append following lines to httpd.conf file.
nano -w /usr/local/etc/apache22/httpd.conf

AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps

Update DirectoryIndex
DirectoryIndex index.php index.html index.htm

Copy php.ini-dist as php.ini
cp /usr/local/etc/php.ini-dist /usr/local/etc/php.ini

Restart Apache22
/usr/local/etc/rc.d/apache22 restart

Test Php
echo “” >> /usr/local/www/apache22/data/test.php

regedit

in Run Dialog ( Win + R ), then find system key

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]

Set the value of “IPEnableRouter” 0 to disable or 1 to enable IP Packet Forwarding. You must restart your computer.

sysctl hw.syscons.bell=0

If you want to disable the beep/bell sound persistently you should add the “hw.syscons.bell=0″ entry to /etc/sysctl.conf file by giving the following command;

echo “hw.syscons.bell=0″ >> /etc/sysctl.conf

Öte yandan anahtarlar işlenirken küçültülür değerler ise büyültülür yani “user id=linq;” yazdığımız zaman oracle üzerinde linq kullanıcısının tanımlı olmasına karşın bağlantı girişimimiz de oturum açma işleminin başarısız olacağını görürüz bunun temel sebebi kullanıcı adı oracle’a gönderilirken tamamı büyük harf  olur ve sistemimiz türkçe karakterleri desteklediği için oracle giden kullanıcı adı “LİNQ” olur. halbuki tanımlı kullanıcımız “LINQ” dur.

“anahtar” değerlere gelirsek yine “user id=linq;” örneği üzerinden gidelim. Madem oracle değerleri büyültüyor o zaman tüm ikilileri büyük harfle yazalım “USER ID=LINQ;”. Bir bağlantı açmak istediğimize tekrar sorun ile karşılaşacağız bu seferki sorunumuz ise geçersiz olan anahtar kelimesidir. Çünkü anahtarlar işlenmeden önce küçültülür ve “USER ID” “user ıd” olur ki yine işletim sistemimizin Türkçe olmasından kaynaklanmaktadır.

Özetle Connection stringlerinizin “anahtar=DEGER;” şeklinde olmasını tavsiye ediyorum.